Clients include
We build maintenance software grounded in the standards your engineers already work to — predicting when and why equipment will fail from the sensors you already have, and turning O&M manuals into maintenance programmes. Backed by 25+ years on the tools.
Maintenance methods are well established — ISO 14224, NORSOK Z-008, decades of published reliability data. Almost nobody has put them inside working software. That is what we do, and it is why our output can be audited instead of taken on faith.
Predicts the remaining useful life of industrial equipment from the sensors you already have — and shows the ISO 14224 failure mode, the position on the P–F curve and the evidence behind every number. Then writes the work order into your CMMS.
Upload an O&M manual, get a full maintenance programme back. Criticality classification to NORSOK Z-008, FMECA and RCM workflows, concept matching and work-instruction generation — the desk work of building a maintenance programme, compressed.
You are locked into nothing at either end. We read the instrumentation you already own, and we write into the maintenance system you already run.
OPC UA · MQTT · ModbusDynamics 365 · SAP PM · MaximoSensor-agnostic in · CMMS-agnostic out · no rip-and-replace
Three things almost nobody in this market puts together — and each one is a reason a reliability engineer will actually act on the number.
Anchored in industry reliability data and expressed in ISO 14224 failure modes — the same language as your CMMS, your FMECA and your reporting. Not a proprietary health score nobody can audit.
You see the failure mode, the position on the P–F curve, the contributing evidence and the confidence. When an engineer challenges a prediction — and they will — there is an answer.
We start from the instrumentation you already have, and write into the CMMS you already run — no vendor's kit required. If an asset needs a sensor, we can supply and fit it; we just never make that the price of entry. The incumbents are being bought by hardware vendors — we stay deliberately neutral.
Milestones, partnerships and announcements.
A signed Letter of Intent with U.S. partner Optec, LLC brings validation on real, operating equipment, and a North-American market path, for the Bluestream PdM platform. Bluestream retains all intellectual property.
Bluestream · Predictive Maintenance
Read full story →
Our predictive-maintenance platform — built with technology partner OPTEC and integrated with Microsoft Dynamics 365 — now runs the full loop: any signal in, the right work order out.
Bluestream · Predictive Maintenance
Read full story →
Melhus kommune's Næringsutvalg has awarded Bluestream AS an NOK 80,000 grant earmarked for the continued development of The Maintenance Development Toolbox.
Most predictive-maintenance tools are built by data scientists who have never planned a shutdown. Ours is built the other way round: the failure-mode logic comes from 25+ years of hands-on operations and maintenance leadership — beginning in the Navy, then 14+ years in oil & gas, and on through aquaculture and industrial facilities across Europe and North America.
That is also the consulting business we still run. It is where the software gets tested against reality, and it is why the standards in the products are applied the way a reliability engineer would actually apply them.
The full O&M consultancy is still here — advisory, CMMS implementation, commissioning, automation and training. Often the fastest route is a mix of both.
Whether you need a maintenance strategy, a CMMS implementation, or just want to try the Toolbox — the first conversation is free.